Supplementary measurements in the case of output complaints, form · of0010g300013bc · Mercedes-Benz WIS

OF00.10-G-3000-13BC

Supplementary measurements in the case of output complaints, form

MODEL 405.05 /10 /12 /20 /22

MODEL 437.42 /43

Branch/Agency company no. Customer

Vehicle ident No. Repair order no.

Tester: Name Date

License plate No. Original registration date Model Engine no. odometer reading: km/miles

Tires Data record no. Device code input Device code output Braking power max. kW

Table for entering the values in the event of an engine output complaint.

 If the engine output is OK following one measurement, no further measurements/measures/repairs may be carried out. Only mark with a cross the damage code that results in success, and only this code can be invoiced.

	1st measurement	2nd measurement	3rd measurement	4th measurement	5th measurement
Difference in output (ΔP)	ΔP	If ΔP <-3 %	If after 2nd measurement ΔP>-3 %	If after 3rd measurement ΔP>-3 %	If after 3rd or 4th measurement ΔP>+3 %
 The sequence of the steps must be adhered to.	Input measurement on output dynamometer	following standard EOL correction	following nozzle holder assembly replacement	following unit pump replacement	possibly output measurement (EOL correction)
Engine output (P) kW at 1800 rpm
Max. torque Nm
at rpm
Boost pressure p mbar at 1800 rpm
EOL values 1
2
3
4
Damage code no.	07 501 XX	07 781 81	07 775 53	07 778 53	07 775 531) 07 778 532)

1) Damage code no. if after 3rd measurement ΔP >+3 %

2) Damage code no. if after 4th measurement ΔP >+3 %

Idle smoothness regulator values	1 cylinder	2 Cylinder	3 Cylinder	4 Cylinder	5 Cylinder	6 Cylinder
Input measurement
Output measurement