gf9130p2002pp

Heated seats switch-over function

Type gf · topic 91.30 · version 0101 · 2004-03-10

Applies to: MODELS 203.0 /2 /7 up to 23.4.04 with CODE (873) Electrically heated left and right front seats

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.30 Seat heater, seat ventilation — Series 203 (models 0**, 2**, 7**)

GF91.30-P-2002PP

Heated seats switch-over function

1.2.00

MODELS 203.0 /2 /7 up to 23.4.04 with CODE (873) Electrically heated left and right front seats

Manual switchover

Function requirement:

The heated seats (HS) are switched on.

Function

Switching the heating stage from "1" to "2" or from "2" to "1" is triggered by one press of the switch position that is not currently active at the left front HS switch (N72/1s10) or the right front HS switch (N72/1s11).

The upper control panel control unit (N72/1) reduces or increases the electric power output of the heated cushions (R13/1, R13/2, R13/3 and R13/4) in the seat depending on the heating stage that has been selected.

Automatically switching to heating stage "1" at the end of the heating-up time

Function requirement:

The heated seats (HS) are switched on.

Function

If the maximum heating-up time of 5 min has been reached, the upper control panel control unit (N72/1) automatically triggers the switchover from heating stage "2" to heating stage "1".

The upper control panel control unit (N72/1) reduces the electric power output of the heated cushions (R13/1, R13/2, R13/3 and R13/4) in the seat and switches the second LED off.

After another 30 minutes at heating stage "1" the heated seats (HS) are switched off altogether.

Front heated seat switch, location/task

GF91.30-P-3000PP

Upper control panel control unit, location/task/design/function

GF54.21-P-4105PP

Referenced documents