GF83.70-P-2002B | Terminate heater operation function | 3.6.98 |
MODEL 203 up to 23.4.04 with CODE (228) Stationary heater
MODEL 230
with CODE (228) Stationary heater
up to Model Year 8
MODEL 215 up to 31.8.02 with CODE (228) Stationary heater
MODEL 220 up to 31.8.02 with CODE (228) Stationary heater
MODEL 209.3 up to 31.5.04 with CODE (228) Stationary heater
The normal end of heater operation, i.e. not triggered by a fault, automatically takes place after expiry of the maximum heating period filed in the STH control unit (A6n1), except model 220 or the STH or ZUH control unit (A6n1) for model 220.
The STAR DIAGNOSIS diagnosis system can be used to code the heating period for 10, 20, 30, 40, 50 or 60 minutes in the STH control unit (A6n1), except model 220 or the STH or ZUH control unit (A6n1) for model 220.
The stationary heater switch (N72s12) for models 203, 209, 230 or stationary heater switch (S46) for models 215, 220 or the STH radio remote control transmitter (A8/3) can be used to manually end heater operation during any phase of the heater period irrespective of the triggering mode.
End heater operation during the combustion phase, function | Models 215, 220 up to 31.5.00 | ||
Models 215, 220 as of 1.6.00 up to 31.8.02, Models 203, 230, 209.3 | |||
End heater operation during the combustion interval, function | Models 215, 220 up to 31.5.00 | ||
Models 215, 220 as of 1.6.00 up to 31.8.02, Models 203, 230, 209.3 |
Referenced documents
- gf8370p3062a Ending heating mode in combustion phase function
- gf8370p3062b End heater operation during the combustion phase, function
- gf8370p3063a Ending heating mode in combustion phase function
- gf8370p3063c End heater operation during the combustion interval, function