gf8295p2000pm

TELE AID switch-on/switch-off characteristics, function

Type gf · topic 82.95 · version 0101 · 2008-04-10

Applies to: MODEL 203.0 /2 /7 with CODE (359) TELE AID emergency call system up to Model Year 8

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.95 Emergency call system — Series 203 (models 0**, 2**, 7**)

GF82.95-P-2000PM

TELE AID switch-on/switch-off characteristics, function

4.12.03

MODEL 203.0 /2 /7
with CODE (359) TELE AID emergency call system
up to Model Year 8

Function requirements

Any telematics service has to be authorized individually. In the event of a defect or if there is no authorization, an error message appears in the multifunction display (A1p13) of the instrument cluster (A1) and in the display of the COMAND operating, display and control unit (A40/3). The system is operational as soon as circuit 30 is active.

Self-test

When circuit 15R is active, the emergency call system control unit (N123/4) performs a self-test (approx. t = 3.5 s). If the test was successful, the system is operational.

Terminating the emergency call

Usually, the emergency service center deactivates the emergency call.

The emergency call system control unit (N123/4) terminates establishing the connection of the emergency call after 5 unsuccessful attempts.

TELE AID control unit/task/design/function

GF82.95-P-4100PMU

Referenced documents