gf8260p2003gi

Volume/tone adjustments, function

Type gf · topic 82.60 · version 0100 · 2001-07-04

Applies to: MODEL 163 as of 1.9.01 with CODE (522) Modular control system (MCS) radio USA with CODE (357) Navigation system - additional unit with CODE (818b) Single CD player - additional unit with CODE (491) U.S. version

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.60 Radio, audio, video systems — Series 163

GF82.60-P-2003GI

Volume/tone adjustments, function

30.4.01

MODEL 163 as of 1.9.01
with CODE (522) Modular control system (MCS) radio USA
with CODE (357) Navigation system - additional unit
with CODE (818b) Single CD player - additional unit
with CODE (491) U.S. version

It is necessary to distinguish between audio and service sources on the radio and navigation module (A2/56):

Audio sources are:
Radio
CD player
CC player
CD changer (code 819a)

Service sources include:
Voice output on navigation
telephone

Signal editing required for volume and tone settings is accomplished by the audio component integrated into the radio and navigation module (A2/56).

-----------------------------------------------------------------------------------------

If the vehicle is additionally equipped with a sound system (code 810), the sound amplifier (A2/13) ensures final audio signal amplification.

Volume setting
By turning the volume knob the volume of the corresponding mode changes.

Tone setting
The tone settings as well as the general brightness adjustment of the display can be reached by pressing the multifunction key "ADJ". If the

multifunction key "ADJ" is pressed for longer than2 s all tone settings of all modes jump back to the center position. This is confirmed by a short peep tone. The adjustment possibilities for treble/bass, balance and fader are summarized in one display.

-----------------------------------------------------------------------------------------

They can be selected by actuating the multifunction keys "" and "". The corresponding setting can be changed by actuating the multifunction keys "-" and "+" or "L", "R", "F" and "R".

These settings can also be made with the "joystick" in an analogous manner.When the headlamps are switched on the brightness setting of the display can be reached by pressing the multifunction key "BRT" in the tone setting menu. Here it is possible to select between "bright" and "dark". Simultaneously pressing the multifunction keys "-" and "+" or "L" and "R" or "F" and "R" resets the corresponding setting in the current mode to the center position

Tone setting is not possible in the telephone or navigation mode.The tone or brightness setting can be exited by pressing the multifunction key EXIT".

Voice output, function

GF82.85-P-3001GI

Radio and navigation module, location/purpose/design/function

GF82.61-P-4109GI

Referenced documents