gf8235p3003ka

Washer nozzles/washer nozzle hose heater, function

Type gf · topic 82.35 · version 0100 · 2008-06-20

Applies to: MODEL 169.0 /3, 245.2 as of model year 09/YoM 08 model refinement package with CODE (875) Heated windshield washer system

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 169 (models 0**, 3**) · Series 245 (models 2**)

GF82.35-P-3003KA

Washer nozzles/washer nozzle hose heater, function

7.5.08

MODEL 169.0 /3, 245.2
as of model year 09/YoM 08 model refinement package
with CODE (875) Heated windshield washer system

General function requirements

Circuit 61 ON

The circuit 61 ON information is sent by the CDI control unit (N3/9) (with diesel engine) or from the ME-SFI [ME] (N3/10) (with gasoline engine) over the engine compartment CAN to the EIS [EZS] control unit (N73). This sends the information to the SAM control unit (N10) over the interior CAN.

Washer nozzle/washer nozzle hose heater, general

The washer nozzle heater and the washer nozzle hose heater prevent the washer fluid from freezing.

Function sequence for washer nozzle/washer nozzle hose heater

The outside temperature is recorded by the instrument cluster (A1) over the outside temperature indicator temperature sensor (B14).

The outside temperature value is sent over the interior CAN to the SAM control unit.

At an outside temperature of T < 5 °C, the left washer nozzle heater (R2/2), the right washer nozzle heater (R2/3) and the washer nozzle hose heater (R2/11) are energized directly by the SAM control unit.

If the outside temperature increases to T > 8 °C, the washer nozzle heater and the washer nozzle hose heater are switched off immediately by SAM control unit.

Electrical function schematic for washer nozzle heater

Model 169

PE82.35-P-2050-97QA

Model 245

PE82.35-P-2050-97BAA

Instrument cluster, component description

A1

GF54.30-P-6000KA

Component description for CDI control unit

N3/9

Engine 640

GF07.16-P-6000OD

ME-SFI [ME] control unit, component description

N3/10

Engine 266

GF07.61-P-6000MD

SAM control unit, component description

N10

GF54.21-P-4157KA

Component description for the EZS control unit

N73

GF80.57-P-6003KA

Referenced documents