GF82.30-P-5000FA | Combination switch, component description | 22.2.08 |
MODEL 203.7 as of model year 09/YoM 08 model refinement package
P82.30-2786-04
S4 Combination switch
Location
The combination switch is mounted on the steering column. It is connected directly to the steering column module (N80).
Task
The combination switch is used to operate the following functions:
- Flash on and off
- One-touch turn signaling
- Main and low beams
- Headlight flasher
- Windshield wiper
- Windshield washer system
Activation of the individual functions
Turn signal:
The turn signal is activated by pressing the combination switch upward for the right side and downward for the left side beyond the detent point respectively.
One-touch turn signaling:
One-touch turn signaling is activated by briefly pressing the combination switch upward for the right side and downward for the left side as far as the detent point.
The turn signal flashes 3 times.
------------------------------------------------------------------------------------------
High and low beams:
The high beam is activated by pressing the combination switch forward. Switching over from high beam to low beam takes place by pulling back the combination switch to the zero position.
Headlamp flasher:
The headlamp flasher is activated for as long as the combination switch is pulled to the rear.
Windshield wiper:
The windshield wipers are switched on by turning the front part of the combination switch:
- Position "1" activates the intermittent wiper or with code (345) Rain sensor, the automatic wiper operation.
- Position "2" activates the continuous wipe at low speed.
- Position "3" activates continuous wiping at a high speed.
------------------------------------------------------------------------------------------
- Windshield washer system
The windshield washer system is switched on by pressing the combination switch in the axial direction.
A brief operation in the axial direction activates touch wiping.