Windshield intermittent wipe, function · gf8230p3003ak · Mercedes-Benz WIS

GF82.30-P-3003AK

Windshield intermittent wipe, function

26.1.04

MODEL 169.0 /3, 245.2
except CODE (U58) Exterior light and vision package
up to Model Year 8

P82.30-2361-06

1 Terminal status

2 Position "I" (interval)

3 Wiper actuation and position feedback

M6/1 Wiper motor

N10 SAM control unit

N73 EIS [EZS] control unit

N80 Steering column module

S4 Combination switch

CAN-B Controller area network bus class B (interior compartment) (CAN B)

Function requirements:

 C. 15R On

Function

The intermittent wipe function is switched on by turning the wipe switch in the combination switch (S4) to position "I" (intermittent).

The SAM control unit (N10) actuates the wiper motor (M6/1) in intermittent wipe mode with a fixed interval pause.

Interruption of intermittent pause

If another wiper function is requested during an intermittent pause, this function is executed without taking the intermittent pause into consideration. After completion of this function, the intermittent pause is started again.

	Slowing down wiper motor, function		GF82.30-P-4007AK
	Anti-block device for wiper motor, function		GF82.30-P-4008AK
	Combination switch, location/task/design/ function		GF82.30-P-2100AK
	Wiper motor location/task		GF82.30-P-4107AK
	Steering column module, location/task		GF54.21-P-4125AK
	SAM control unit, location/task		GF54.21-P-4156AK
	Electronic ignition switch control unit location/design		GF80.57-P-4120AK

Referenced documents

gf5421p4125ak Steering column module, location/task
gf5421p4156ak SAM control unit, location/task
gf8057p4120ak Electronic ignition switch control unit, location/design
gf8230p2100ak Combination switch, location/task/design/function
gf8230p4007ak Slowing down wiper motor, function
gf8230p4008ak Anti-lock protection for wiper motor, function
gf8230p4107ak Wiper motor location/task