P82.10-2041-09
A1 Instrument cluster
A1e1 Left turn signal indicator lamp
A1e2 Right turn signal indicator lamp
A1h2 Audible turn signal indicator
CAN Controller-area network (data bus)
E1e5 Left front turn signal lamp
E2e5 Right front turn signal lamp
E3e1 Left rear turn signal lamp
E4e1 Right rear turn signal lamp
E6/5 Left exterior mirror turn signal lamp
N10/8 Rear SAM control module
N28/1 Trailer recognition control module
N69/1 Left front door control module
N69/2 Right front door control module
N72/1 Upper control panel control module
N80 Jacket tube module
X58 Trailer hitch socket (13-pin)
E6/6 Right exterior mirror turn signal lamp
K40/5 Rear fuse and relay module
K40/6 Left front fuse and relay module
K40/7 Right front fuse and relay module
N10/6 Left front SAM control module
N10/7 Right front SAM control module
Function sequence
Function prerequisites:
Hazard warning flasher switch actuated.
1 The position of the hazard warning flasher switch is read in by the upper control panel control module (N72/1).
2 The upper control panel control module sends a signal (1) to the jacket tube module (N80) via the CAN bus.
3 The jacket tube module generates the flasher message and sends a signal (2) via the CAN bus to the
– instrument cluster (A1),
– left front SAM control module (N10/6),
– right front SAM control module (N10/7),
– rear SAM control module (N10/8),
– trailer recognition control module (N28/1),
– left front door control module (N69/1 and
– right front door control module (N69/2).
4 The instrument cluster (A1) actuates the audible turn signal indicator (A1h2), the left or right turn signal indicator lamp (A1e1, A1e2).
5 The left front SAM control module (N10/6), right front SAM control module (N10/7) and rear SAM control module (N10/8) actuate the following lamps:
– left front turn signal lamp (E1e5),
– right front turn signal lamp (E2e5),
– left rear turn signal lamp (E3e1)
– right rear turn signal lamp (E4e1).
6 The left front door control module (N69/1) and right front door control module (N69/2) actuate the following lamps:
– left exterior mirror turn signal lamp (E6/5) and
– right exterior mirror turn signal lamp (E6/6).
7 The trailer recognition control module (N28/1) actuates the trailer hitch socket (13-pin, X58), if necessary.
If the jacket tube module fails, the flashing signal for the hazard warning flashers is generated by the upper control panel control module.
Left signal acquisition and actuation module (SAM), location/purpose/design/ function | |||
Right signal acquisition and actuation module (SAM), location/purpose/design/ function | |||
Rear signal acquisition and actuation module (SAM), location/purpose/design/ function | |||
Trailer recognition control module, location/purpose | |||
Jacket tube module, location/purpose/design/ function | |||
Upper control panel control module, location/purpose/design/ function |
Referenced documents
- gf5421p4101s Left signal acquisition and actuation module, location/task/design/function
- gf5421p4102s Right signal acquisition and actuation module, location/task/design/function
- gf5421p4103s Rear signal acquisition and actuation module, location/task/design/function
- gf5421p4104s Casing tube module position/task/design/function
- gf5421p4105s Upper control panel control module location/task/design/function
- gf8210p2106s Trailer recognition control module, location/task