Light warning function with manually activated driving lights
Function requirements
C. 15C ON
The rotary light switch (S1) is set to the "Standing lamp ON" or "Low beam ON" position
-----------------------------------------------------------------------------------------
Function (up to 8.7.07)
The left front door control unit (N69/1) monitors the current door status and transmits this to the instrument cluster (A1) via the Controller Area Network bus class B (interior) (CAN-B).
As soon as the transmitter key (A8/1) is removed from the EIS [EZS] control unit (N73), an acoustic light warning is given via the warning buzzer (A1h1) in the instrument cluster when the driver door is opened.
-----------------------------------------------------------------------------------------
Function (as of 9.7.07)
If the manual driving lights were switched on by setting the rotary light switch to the "Low beams On" position, these are switched off by removing the transmitter key or if the driver door is opened with the transmitter key still inserted. The acoustic light warning does not sound.
If the standing or parking lights were switched on by setting the rotary light switch to the "Standing lights On" or "Parking lights On" position, these remain switched on even when the transmitter key has been removed.
If the driver door is opened while the standing lights are on, the acoustic light warning function is triggered.
Light warning function with automatically activated driving lights
Function (up to 8.7.07)
If the auto on/off headlamps (rotary light switch set to "AUTO" and rain/light sensor (B38/2) transmits the signal "Darkness") or the daytime running lights are active, at the end of the journey there is no acoustic light warning as the driving lights are switched off completely when the transmitter key (circuit 15C OFF) is removed.
If, however, the driver door is opened before removing the transmitter key (circuit 15C On), the acoustic light warning will sound.
Function (as of 9.7.07)
If the auto on/off headlamps or daytime running lights are active, the exterior lights are completely shut off as of circuit 15R. An acoustic light warning therefore does not sound.
Instrument cluster, component description | A1 | ||
Transmitter key, component description | A8/1 | ||
Rain/light sensor, component description | B38/2 | ||
Front SAM control unit, component description | N10 | ||
Left front door control unit, component description | N69/1 | ||
Electronic ignition/starter switch control unit (EIS), component description | N73 | ||
Rotary light switch, component description | S1 |
Referenced documents
- gf5421p6000rt Rain/light sensor, component description
- gf5421p7010rt Front SAM control unit, component description
- gf5430p6000rt Instrument cluster, component description
- gf7229p4141rt Left front door control unit, component description
- gf8057p6000rt Electronic ignition/starter switch control unit (EIS), component description
- gf8057p6010rt Transmitter key, component description
- gf8210p4106rt Rotary light switch, component description