gf8057p2003a

Function of moving electronic ignition switch to position 0

Type gf · topic 80.57 · version 0103 · 1999-06-10

Applies to: MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 (except 210.081 /281) as of 1.3.97

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.57 Drive authorization system (DAS) — Series 202 · Series 208 · Series 210 (models 003, 004, 006, 007, 010, 015, 016, 017, 020, 025, 026, 035, 037, 045, 048, 053, 055, 061, 062, 063, 065, 070, 072, 074, 081, 082, 083, 206, 210, 215, 216, 217, 225, 226, 235, 237, 245, 248, 261, 262, 263, 265, 270, 272, 274, 281, 282, 283, 606, 610, 616, 617, 663)

GF80.57-P-2003A

Function of moving electronic ignition switch to position 0

17.12.96

MODEL 202 as of 1.6.97,
208, 210.081 /281,
210 (except 210.081 /281) as of 1.3.97

If the remote control key is turned to position 0 in the electronic ignition switch control module (N73), the EIS sends the CAN message circuit "15 R OFF" and switches on the power supply for the electric steering column control module (N26/5). The EIS then releases the ignition key allowing it to be removed.

After removing the remote control key the EIS sends a command to the ESC to lock.

The ESC then locks the steering.

Function of moving electronic ignition switch (EIS) to position 1 or 2

GF80.57-P-2002A

Checking drive authorization

GF80.57-P-3001A

Electronic ignition switch (EIS) control module

GF80.57-P-4102A

Electric steering column (ESC) control module

GF80.57-P-4103A

Referenced documents