GF80.50-P-2004E | Tripping of anti-theft alarm (ATA), function | 7.7.97 |
MODEL 129 up to 31.5.98,
140,
202 up to 31.5.97 with CODE (551a) Anti-theft alarm (ATA)
MODEL 129 up to 31.5.98,
140,
202 up to 31.5.97 with CODE (552a) Anti-theft alarm (ATA) for Switzerland
The anti-theft alarm (ATA) is triggered when:
an exterior contact is actuated
the brake contact is actuated, except model 129
the radio is removed (electrical connector disconnected)
the ignition is jumpered.
Model 129 only:
the glove compartment is opened (ATA glove box switch (S62/7))
the center console stowage compartment is opened
(ATA center console compartment switch (S62/8))
On vehicles with code 882 also by
Interior motion sensor (IMS), not model 129
Anti-towing sensor (TS)
This assumes that the corresponding inputs have been armed by activating the ATA.
The armed inputs are checked by the ATA control module (N26) twice per second.
If two checks of the same input in sequence indicate that the input is not in the non-actuated state, the PSE control module triggers an acoustic as well as optical alarm.
ATA control module, location/purpose/ design/function | |||
Alarm triggered by exterior contact, function | |||
Alarm triggered by brake contact, function | except model 129 | ||
Alarm triggered by anti-towing sensor (TS), function | with code 882 | ||
Alarm triggered by interior motion sensor (IMS), function | with code 882 except model 129 |
Referenced documents
- gf8050p3015e Alarm triggered by exterior surface contact, function
- gf8050p3016c Alarm triggered by brake contact, function
- gf8050p3022c Triggering alarm with interior motion sensor, function
- gf8050p3023c Alarm triggered by anti-towing sensor, function
- gf8050p4102a ATA control module, location/purpose/design/function