Activating anti-them alarm, function

P80.50-2293-09

1 Opening CL (disarming)

2 Closing CL (arming)

3 Deselecting interior motion sensor and/or anti-towing sensor

4 Activating interior motion sensor and/or anti-towing sensor

5 ATA is armed (LED actuation)

A8/1 Remote control key

A26/13 Interior motion sensor (master)

A26/15 Interior motion sensor (slave)

B33 ATA inclination sensor

H3/1 Alarm signal horn with additional battery

N10/3 Rear SAM control module with fuse and relay module 1

N70 Front overhead control panel control module

N73 EIS [EZS] control module

S6/5 CL hazard warning flasher switch

S17/3 Left front door contact switch

S17/4 Right front door contact switch

S17/5 Left rear door contact switch

S17/6 Right rear door contact switch

S62 ATA hood switch

S88/3 Trunk lid closing assist locking eye microswitch

Activating ATA

With the "closing" command from the remote control or by pressing the button on the door handle via keyless go the ATA is activated as follows:

All alarm inputs are checked cyclically (10 ms when active mode, and every 70 ms when sleep mode) for their status.If all checks within 10 s indicate the non-actuated state, the corresponding input is regarded as a valid alarm source.

Alarm inputs set later to the non-actuated state, e.g. if the trunk lid is closed only after the vehicle is locked, are also ready for alarm after 10 s.