gf8030p2002a

Function of drive authorization system stage X

Type gf · topic 80.30 · version 0102 · 1999-11-08

Applies to: MODEL 129, 140 as of 1.6.96, 210 / (except 210.081 /281) as of 1.6.96 up to 28.2.97 with CODE (491) USA version MODEL 202 as of 1.8.96 up to 31.5.97 with CODE (491) USA version

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.30 Infrared remote control — Series 129 · Series 140 · Series 202 · Series 210 (models 003, 004, 006, 007, 010, 015, 016, 017, 020, 025, 026, 035, 037, 045, 048, 053, 055, 061, 062, 063, 065, 070, 072, 074, 082, 083, 206, 210, 215, 216, 217, 225, 226, 235, 237, 245, 248, 261, 262, 263, 265, 270, 272, 274, 282, 283, 606, 610, 616, 617, 663)

GF80.30-P-2002A

Function of drive authorization system stage X

6.5.96

MODEL 129, 140 as of 1.6.96,
210 / (except 210.081 /281) as of 1.6.96 up to 28.2.97 with CODE (491) USA version

MODEL 202 as of 1.8.96 up to 31.5.97 with CODE (491) USA version

Function of drive authorization system stage X

P80.30-0290-04

System linkage

CAN Controller area network

L11 Transponder coil

N54/1 IR DAS control module

S2/1 Ignition/starter switch

X11/4 Data link connector (DTC readout)

1 Infrared remote control key with transponder

2 Engine control module

3 Engine

If a valid transponder signal is recognized by the infrared DAS control module (N54/1) after switching on the ignition, the engine control is released.

-----------------------------------------------------------------------------------------

Releasing engine control

GF80.30-P-3004A

Referenced documents