gf8030p2001a

Drive authorization system stage 2a, function

Type gf · topic 80.30 · version 0104 · 1999-11-08

Applies to: MODEL 129, 140 as of 1.6.96, 210 (except 210.2) as of 1.6.96 up to 28.2.97 except CODE (491) MODEL 170, 210.2 (except 210.281) up to 28.2.97 except CODE (491) MODEL 210.072 up to 31.5.96 with CODE (491) U.S. version MODEL 202 (except 202.083) as of 1.8.96 up to 31.5.97 except CODE (491) MODEL 202.083 up to 31.5.97 except CODE (491)

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.30 Infrared remote control — Series 129 · Series 140 · Series 170 · Series 202 (models 018, 020, 022, 023, 024, 025, 026, 028, 029, 033, 078, 080, 081, 082, 083, 085, 086, 087, 088, 089, 093, 120, 121, 122, 125, 128, 133, 134, 180, 182, 188, 193, 194) · Series 210 (models 0**, 072, 206, 210, 215, 216, 217, 225, 226, 235, 237, 245, 248, 261, 262, 263, 265, 270, 272, 274, 282, 283, 6**)

GF80.30-P-2001A

Drive authorization system stage 2a, function

30.1.96

MODEL 129, 140 as of 1.6.96,
210 (except 210.2) as of 1.6.96 up to 28.2.97 except CODE (491)

MODEL 170,
210.2 (except 210.281) up to 28.2.97 except CODE (491)

MODEL 210.072 up to 31.5.96 with CODE (491) U.S. version

MODEL 202 (except 202.083) as of 1.8.96 up to 31.5.97 except CODE (491)

MODEL 202.083 up to 31.5.97 except CODE (491)

Drive authorization system stage 2a, function

P80.30-0290-04

System interlinkage

CAN Controller area network

L11 Transponder coil

N54/1 Drive authorization system (DAS) infrared control module

S2/1 Ignition/starter switch

X11/4 Data link connector

1 IR remote control key with transponder

2 Engine control module

3 Engine

If a valid transponder signal is recognized by the DAS infrared control module (N54/1) after the ignition is switched on, the engine control is released.

Enabling engine control, function

GF80.30-P-3004A

Referenced documents