GF77.20-P-3003MX | Sliding/pop-up roof desynchronization, function | 15.8.02 |
MODEL 240 with CODE (414A) Electric glass sliding/pop-up roof
Desynchronized state
The position of the sliding/pop-up roof [SHD] is not known. It can be moved in two directions, but only by using the "open sliding roof" and "open pop-up roof" buttons of the roof system switch (N70s1). Closing is no longer possible using the roof system switch (N70s1) because it cannot definitely identify the direction of motor rotation. To indicate that it is desynchronized and to avoid strain on the mechanical limit stop in the "sliding roof open" position, the roof is actuated in the "open sliding roof" direction for approx. 0.3 sec, after which the roof system switch (N70s1) must again be pressed in the "open sliding roof" direction.
Desynchronization
Desynchronization occurs in the following cases:
1. Circuit 30 off/on
2. The sliding/pop-up roof exceeds the defined travel area by 5 motor rotations
3. One of the two Hall sensor signals is absent for t > 320 ms
4. Both Hall sensor signals are absent for t > 320 ms even after the roof is reversed
5. The defined Hall sensor signal sequence is faulty
When desynchronized, the sliding/pop-up roof function is restricted. It is only possible to open the sliding/pop-up roof according to the described conditions
Synchronizing sliding/pop-up roof, function | |||
Sliding/pop-up roof lock-up recognition, function | |||
Sliding/pop-up roof position measuring, function | |||
Sliding/pop-up roof obstruction sensor, function | |||
Sliding/pop-up roof motor, location/purpose/function | |||
Overhead control panel control module, location/purpose |
Referenced documents
- gf7720p3000mx Sliding/pop-up roof lock-up recognition, function
- gf7720p3001mx Sliding/pop-up roof position measuring, function
- gf7720p3002mx Synchronizing sliding/pop-up roof, function
- gf7720p3004mx Sliding/pop-up roof obstruction sensor, function
- gf7720p4105mx Sliding/pop-up roof motor, location/purpose/function
- gf8220p4120mx Overhead control panel control module, location/task