gf7720p2012pc

Close panoramic sliding roof function

Type gf · topic 77.20 · version 0101 · 2008-04-08

Applies to: MODEL 203.7 with CODE (413) Panoramic sliding roof up to Model Year 8

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 203 (models 7**)

GF77.20-P-2012PC

Close panoramic sliding roof function

27.9.00

MODEL 203.7
with CODE (413) Panoramic sliding roof
up to Model Year 8

Function requirements

No overvoltage/undervoltage

Circuit 15R ON or

Circuit 15 ON and

The overhead control panel control module (N70) recognizes the neutral position before switch is activated

(no activation within 1 second)

Function

The "close panoramic sliding roof" function is only available when the panoramic sliding roof is in the normalized state.

It is deployed by moving the roof system switch (N70s1) toward the front of the vehicle. The roof system switch (N70s1) must remain manually pressed. The overhead control panel control module (N70) then actuates the roof system motor (M12m1), which closes the panoramic sliding roof. The motor operates for as long as the switch is activated or until the panoramic sliding roof reaches its end position.

The "close panoramic sliding roof" function is aborted if a lock-up of the panoramic sliding roof is detected. The panoramic sliding roof is not equipped with an obstruction sensor.

Open panoramic sliding roof function

GF77.20-P-2014PC

Panoramic sliding roof lock-up recognition function

GF77.20-P-3007PC

Panoramic sliding roof normalization function

GF77.20-P-3009PC

Panoramic sliding roof location/task/design/function

GF77.20-P-4104PC

Overhead control panel control module location/task/design/function

GF82.20-P-4101PP

Referenced documents