GF68.50-P-2000PC | Convenience opening function | 11.10.00 |
MODEL 203.7
with CODE (413) Panoramic sliding roof
up to Model Year 8
P68.50-2127-09
Networking of components
A8/1 Transmitter key
A26/1 Left front IR receiver unit
A26/2 Right front IR receiver unit
N69/1 Left front door control module
N69/2 Right front door control module
N70 Overhead control panel control module
N73 EIS [EZS] control module
M24 Sun blind drive unit
M24m1 Sun blind motor
Function requirements
No overvoltage/undervoltage
All doors closed (state: unlocked)
Ignition key in "0" position or removed
"Unlock" button on transmitter key (A8/1) pressed and held
Function
The transmitter key (A8/1) sends an infrared signal to the left front IR receiver (A26/1) or the right front IR receiver (A26/2). The overhead control panel control module (N70) receives the request for "convenience opening" via CAN and actuates the sun blind motor (M24m1) in the "open sun blind" direction. This opens the panoramic sliding roof sun blind.
To open the panoramic sliding roof, the "Unlock" button on the transmitter key (A8/1) must be pressed once again.
The "open sun blinds" function will only be executed for as long as the "Unlock" button on the transmitter key (A8/1) is pressed
The convenience opening function for the panoramic sliding roof is aborted if
The request is no longer received via CAN, or
The function requirements listed above are no longer satisfied.
The convenience opening function also opens the windows.
Referenced documents
- gf6850p2001pc Convenience closing function
- gf6850p4101pc Panoramic sliding roof roller blind location/task/design/function
- gf8045p0003pp Convenience feature (CF [KFB]) function
- gf8220p4101pp Overhead control panel control unit, location/task/design/function