Modular tachograph (MTCO), menu guidance and adjustments, function

N54.61-2111-01

Ejection active display (31l)

31 Display

31l Ejection active display

31m Operating bar display

Function requirements:

 Vehicle is at a standstill

 Circuit 15 ON

In order to operate the modular tachograph (A56), the above function requirements must be present.

-----------------------------------------------------------------------------------------

With the aid of the buttons integrated in the modular tachograph (A56) driver 1 or driver 2 can operate the modular tachograph (A56) and perform the following adjustments or inquiries

 Insert or remove tachograph disk or tachograph disks

 Adjust time groups for driver 1 or driver 2

 Adjust time

 Display fault memory

-----------------------------------------------------------------------------------------

The following adjustments or inquiries can still also be performed for the service area:

 Information/UTC/Stand

 Programming data

 Start/finish of daylight savings time

 Vehicle speed pulse-simulation (v-pulse simulation)

Insert or remove tachograph disk or tachograph disks

By pressing the unlock drawer button on the modular tachograph (A56) the drawer of the modular tachograph (A56) is unlocked, the ejection active display (31l)appears on the display (31) of the modular tachograph (A56). In addition the operating bar display (31m) on the display (31) of the modular tachograph (A56) shows that this process can take some time. Afterwards the drawer can be pulled out and the tachograph disk or tachograph disks inserted or removed. The drawer is closed by pressing in up to the stop again.

-----------------------------------------------------------------------------------------

Adjust time groups for driver 1 or driver 2

Driver 1 can adjust the respective time group by pressing the adjustments for time group, driver 1 button on the modular tachograph (A56).

Driver 2 can adjust the respective time group by pressing the adjustments for time group, driver 2 button on the modular tachograph (A56).

One of the following time groups can be adjusted for each driver:

 Wheel times

 Other working hours

 Readiness times (waiting times, co-driver time, time in the bunk room while driving for driver 2)

 Break times and rest times

 The legal provisions regarding the adjustments on the modular tachograph (A56) should be observed.

-----------------------------------------------------------------------------------------

Adjust time

The current time can be adjusted via the "Adjust time" menu by pressing the menu button, the plus button or minus button on the modular tachograph (A56).

Display fault memory

One or several faults can be displayed via the "Fault memory" menu by pressing the menu button, the plus button or the minus button on the modular tachograph (A56).

Information/UTC/Stand

The "Information/UTC/status" can be displayed by pressing the menu button 3 times on the modular tachograph (A56). By pressing the menu button on the modular tachograph (A56) for a longer period a changeover is made again to the basic display (31) on the modular tachograph (A56).

-----------------------------------------------------------------------------------------

Programming data

The "programming data" menu can be displayed by pressing the menu button 4 times on the modular tachograph (A56). It is possible to scroll through the "Programming data" menu by pressing the plus button or minus button on the modular tachograph (A56). By pressing the menu button on the modular tachograph (A56) a changeover is made again to the basic display (31) on the modular tachograph (A56).

Start/finish of daylight savings time

The "Start/finish of daylight savings time" can be displayed by pressing the menu button five times on the modular tachograph (A56). It is possible to scroll through the "Start/finish of daylight savings time" menu by pressing the plus button or minus button on the modular tachograph (A56). By pressing the menu button on the modular tachograph (A56) for a longer period a changeover is made again to the basic display (31) on the modular tachograph (A56).

-----------------------------------------------------------------------------------------

Vehicle speed pulse simulation (v-pulse simulation)

The "v-pulse simulation" is displayed by pressing the menu button 6 times on the modular tachograph (A56). By pressing the menu button on the modular tachograph (A56) for a longer period a changeover is made again to the basic display (31) on the modular tachograph (A56).