GF46.15-P-2003PP | Storing steering column position, function | 3.2.04 |
MODEL 203.0 /2 /7
with CODE (275) Electrically adjustable driver seat, steering column and outside mirrors with memory
with CODE (242) Electrically adjustable front passenger seat with memory
up to Model Year 8
P46.15-2147-05
Illustrated on model as of 1.7.02
1 Circuit status and memory block number
2 Door contact status
3 "Store" request
4 Position via Hall sensor
M20m1 Fore/aft adjustment motor
M20m2 Height adjustment up/down motor
N10/2 Rear SAM control unit with fuse and relay module
N32/1 Driver-side front seat adjustment control unit with memory
N69/1 Left front door control unit
N73 DI control unit
S17/3 Left front door contact switch
S91/2 Left front door ESA [ESV] switch group (with memory)
S91/2s9 Memory store button switch
-----------------------------------------------------------------------------------------
S91/2s14 Memory location 1, 2, 3 switch
CAN-B Controller area network bus, class B (interior compartment) (CAN B)
-----------------------------------------------------------------------------------------
Manual storage
Function prerequisites
Circuit 15R On or circuit 15 On or
Driver door open.
Function
Select memory position by rotating the memory switch
1, 2, 3 (S91/2s14).
Press memory switch (S91/2s9) for approx. 0.4 seconds and release again.
Press memory switch 1, 2 ,3 (s14) within 3seconds (S91/2).
The positions of the steering column are stored in the driver-side front seat adjustment control unit with memory (N32/1) depending on the key.
In addition the position of the driver seat and outside mirrors are stored in each memory.
Automatic memory
Function
Key-dependent storage of the current position (driving position) takes place with the transition from circuit 15 to circuit 15R.
In addition the position of the driver seat and outside mirrors are stored.
These positions are approached automatically when the appropriate transmitter key is used.
Memory block number
The transmitter keys are managed with the memory block number. The memory block number is issued by the electronic ignition switch control unit (N73).
Function of steering column adjustment motor position measurement | |||
Steering column adjustment motor group, location/task | |||
Steering column adjustment switch, location/task | up to 30.6.02 | ||
as of 1.7.02 | |||
Front driver-side door control unit, location/task/design/function | |||
Left front seat adjustment control unit with memory location/task | |||
Electronic ignition switch control unit, location/task/design/function | |||
Front seat adjustment switch group, location/design |
Referenced documents
- gf4615p3000pp Function of steering column adjustment motor position measurement
- gf4615p4103pp Steering column adjustment motor group, location/task
- gf4615p5001pa Steering column adjustment switch, location / task
- gf4615p5001pp Steering column adjustment switch, location / task
- gf7229p4105pp Front driver-side door control module, location/purpose/design/function
- gf8057p4102pp Electronic ignition switch control unit, location/task/design/function
- gf9129p2106pp Left front seat adjustment control unit with memory location/task
- gf9129p2112pp Front seat adjustment switch group, location/design