gf4615p2000tx

Steering column adjustment, function

Type gf · topic 46.15 · version 0101 · 2007-05-09

Applies to: MODEL 219.3 with CODE (275) Memory package (driver seat, steering column, mirrors)

Where it sits

Function group 2 Chassis › 46 Steering › 46.15 Steering column adjustment — Series 219 (models 3**)

GF46.15-P-2000TX

Steering column adjustment, function

25.4.07

MODEL 219.3 with CODE (275) Memory package (driver seat, steering column, mirrors)

Steering column adjustment, function

P46.15-2158-06

Shown on vehicle up to 31.5.07

1 Manual request

2 Memory request

3 Door status (up to 31.5.07)

4 Circuit status (up to 31.5.07)

5 Actuation/position feedback

M20m1 Fore/aft adjustment motor

M20m2 Height adjustment up/down motor

N10/2 Rear SAM control unit with fuse and relay module

N32/1 Driver front seat adjustment control unit with memory

N69/1 Door control module front left

N73 EIS [EZS] control unit

N80 Steering column module

S17/3 Left front door contact switch

S59/1s1 Steering column adjustment raise/lower, forward/back switch

-----------------------------------------------------------------------------------------

S91/2 Left front seat adjustment switch group

S91/2s9 Memory switch

S91/2s14 Memory button 1, 2, 3 switch

CAN-B Controller Area Network bus, class B (interior compartment)
(CAN B)

-----------------------------------------------------------------------------------------

Function requirements

Voltage not to high or too low

No lockup recognition

Circuit 15R On or driver door open
(up to 31.5.07)

Manual of steering column

The steering column can be adjusted electrically fore/aft and up/down by pressing the steering column adjustment switch.

The corresponding adjustment request is transmitted to the front seat adjustment control unit by the steering column adjustment switch on the steering column module via CAN-B.

The front seat adjustment control unit actuates the motors accordingly.

Adjustment memory

The steering column can be adjusted into a stored position via the corresponding button in the memory switch.

At the same time as this the outside mirrors and driver seat assume the corresponding position.

The corresponding adjustment request is transmitted to the front seat adjustment control unit by the seat adjustment switch group via the left front door control unit.

The front seat adjustment control unit actuates the motors up to the stored position for the duration of actuation of the memory switch.

Releasing the memory switch leads to the immediate termination of the adjustment.

Steering column adjustment motor group, component description

M20

GF46.15-P-5020TX

Rear SAM control unit with fuse and relay module, component description

N10/2

GF54.21-P-6030TX

Left front seat adjustment control unit with memory, component description

N32/1

GF91.29-P-5221TX

Driver-side front door control unit, component description

N69/1

GF72.29-P-6000TX

Electronic ignition/starter switch control unit (EIS), component description

N73

GF80.57-P-6000TX

Steering column module component description

N80

GF54.21-P-6050TX

Steering column adjustment switch, component description

S59/1s1

GF46.15-P-5010TX

Front seat adjustment switch group, component description

S91/2

GF91.29-P-5220TX

Referenced documents