gf3233w3003a

Saving the frame height, function

Type gf · topic 32.33 · version 0104 · 2004-05-06

Applies to: MODELS 375.35 /4, 944, 950.03 /04 /05 /20 /21 /22 /24 /53 /54 /60 /61 /62, 952.24, 954.03 /04 /05 /06 /22 /23 /24 /53, 957

Where it sits

Function group 2 Chassis › 32 Suspension › 32.33 Ground clearance compensator (NR/ENR) — Series 375 (models 35*, 4**) · Series 944 · Series 950 (models 03*, 04*, 05*, 20*, 21*, 22*, 24*, 53*, 54*, 60*, 61*, 62*) · Series 952 (models 24*) · Series 954 (models 03*, 04*, 05*, 06*, 22*, 23*, 24*, 53*) · Series 957

GF32.33-W-3003A

Saving the frame height, function

5.2.97

MODELS 375.35 /4, 944, 950.03 /04 /05 /20 /21 /22 /24 /53 /54 /60 /61 /62, 952.24, 954.03 /04 /05 /06 /22 /23 /24 /53, 957

Saving the frame height, function

W32.33-1014-09

All models except 375, 944, 950.5/6, 954.5,

957

1 Raise/lower front indicator lamp

2 Raise/lower rear indicator lamp

3 Raise/lower front On/Off key

4 Raise/lower rear On/Off key

5 Frame height M1 key

6 Frame height M2 key

7 Driving position key

8 Raise key

9 Lower key

B51 Front axle position sensor

B52 Left driven axle position sensor

B53 Right driven axle position sensor

S50 NR/ENR operating unit

Y26 NR/ENR front axle solenoid valve

Y27 NR/ENR valve block (4x2 or 6x4)

Y28 NR/ENR valve block
(6x2 or 6x2/4)

10 Stop key

11 NR/ENR display field

11.1 "Vehicle frame above normal level" indicator

11.2 "Vehicle level below normal level" indicator

A14.1 NR/ENR control unit

A14.2 NR/WR control unit

Saving the frame height, function

W32.33-1034-09

Models 375, 944, 950.5/6, 954.5

1 Raise/lower front indicator lamp

2 Raise/lower rear indicator lamp

3 Raise/lower front On/Off key

4 Raise/lower rear On/Off key

5 Frame height M1 key

7 Driving position key

8 Raise key

9 Lower key

B51 Front axle position sensor

B52 Left driven axle position sensor

B53 Right driven axle position sensor

S50 NR/ENR operating unit

Y26 NR/ENR front axle solenoid valve

Y27 NR/ENR valve block (4x2 or 6x4)

Y28 NR/ENR valve block (6x2 or 6x2/4)

10 Stop key

11 NR/ENR display field

11.1 "Vehicle frame above normal level" indicator

11.2 "Vehicle level below normal level" indicator

A14.1 NR/ENR control unit

A14.2 NR/WR control unit

Saving the frame height, function

W32.33-1021-09

Model 957

1 Raise/lower front indicator lamp

2 Raise/lower rear indicator lamp

3 Raise/lower front On/Off key

4 Raise/lower rear On/Off key

5 Frame height M1 key

6 Frame height M2 key

7 Driving position key

8 Raise key

B51 Front axle position sensor

B52 Left driven axle position sensor

B53 Right driven axle position sensor

S50 NR/ENR operating unit

Y26 NR/ENR front axle solenoid valve

Y27 NR/ENR valve block (4x2 or 6x4)

Y28 NR/ENR valve block (6x2 or 6x2/4)

9 Lower key

10 Stop key

11 NR/ENR display field

11.1 "Vehicle frame above normal level" indicator

11.2 "Vehicle level below normal level" indicator

A14.1 NR/ENR control unit

Function

Saving the frame height

1 Basic condition:

Vehicle is stationary

NR/ENR operating unit (S50) activated.

The raise/lower rear indicator lamp (2) lights up and the raise/lower front indicator lamp (1) also lights up if the vehicle is equipped with full air suspension.

2 The vehicle frame is raised or lowered when the driver presses the raise or lower key (8 or 9). The "vehicle above or below normal level" indicator (11.1 or 11.2) lights up in the NR/ENR display field (11).

3 The control unit (A14.1/A14.2) actuates the NR/ENR valve block (Y27/Y28) at the driven axle and the NR/ENR solenoid valve (Y26) at the front axle of vehicles with full air suspension and the air bellows are pressurized or vented.

4 The vehicle frame and therefore the cargo area is set to the desired height for example of a loading ramp where the vehicle will be loaded or unloaded frequently in the future.

5 If the driver presses the stop key (10) and frame height M1 or M2 key (5 or 6) simultaneously, the frame height is saved.

A vehicle height can only be saved when the vehicle is stationary. The driver must always press the stop key first, hold this key down and then press either the frame height M1 or M2 key. The saved frame heights can only be displayed when the vehicle speed is < 30 km/h.

Position sensor, location/task/design

GF32.33-W-3101A

ENR valve block, location/task

4x2 and 6x4 vehicles

GF32.33-W-3103A

6x2, 6x2/2 and 6x2/4 vehicles

GF32.33-W-3103B

ENR front axle solenoid valve, location/task

Models 950.03/04/05/20/21/24/53/54/60/61, 954.03/04/05/06/23/53 with code (A00) air-sprung front axle,

Model 957

GF32.33-W-3104A

ENR operating unit, location/task/design

GF32.33-W-3105A

NR/ENR control unit, location/task

Models 950.03/04/05/20/21/22/24/53/54/60 / 61/62, 957 except CODE (CD9) roll control (WR)

Models 375.35/4, 944, 952.24, 954.03/04/05/ 06/22/23/24/53

GF32.33-W-3111A

NR/WR control unit, location/task

Model 950.03/04/05/20/21/22/24/53/54/60/61 with code (CD9) roll control (WR)

GF32.33-W-3112A

Referenced documents