2.1 Testing, adjusting idle speed
Testing, adjusting idle speed op. no. 07-2053 or 07-2056 Selector lever position AT indication Clutch switch MT Clutch pedal not operated indication Clutch pedal operated indication Coolant temperature °C Engine speed rpm |
- - |
Referenced documents
- ad0000p1000bz Connection and use of test equipment
- ad0000p200003a Connecting Hand-Held Tester (HHT), reading out fault memory
- ad0000p200003b Connecting Hand-Held Tester (HHT), reading out fault memory
- ad0000p200003c Connect hand-held tester (HHT), read out diagnostic trouble code memory
- ad0000p200003d Connecting hand-held tester (HHT), reading fault memory
- dh0000g00vt00x 00 - Foreword to Diagnosis handbook Model 463
- dh0000gm0an00x 00 - Use of Diagnosis Manual Model 463 with Engine 104 HFM, 606 ERE
- dh0000gm0up00x 00 - Survey of Test Description Model 463 with Engine 104 HFM, 606 ERE
- dh0201gm00b14x 2.1 - Test and setting data 14b - Testing, adjusting engine Engine 606 IFI
- dh0201gm00c14x 2.1 - Test and setting data 14c - Cold start, warming-up Engine 606 IFI
- dh0201gm00d14x 2.1 - Test and setting data 14d - Testing engine output and exhaust emission Engine 606 IFI
- dh0201gm00e14x 2.1 - Test and setting data 14e - Testing cruise control, drive authorization Engine 606 IFI
- dh0201gm00f14x 2.1 - Test and setting data 14f - CAN bus Engine 606 IFI
- dh0201gm00g14x 2.1 - Test and setting data 14g - Testing fuel pump, vacuum pump, injection nozzles Engine 606 IFI