be3220b100002b

Rear axle steel suspension

Type be · topic 32.20 · version 0102 · 2020-07-02

Applies to: Model 368, 382, 384, 386, 388, 693 (except 693.193/194), 694, 695, 696 Model 958.092/16/18

Where it sits

Function group 2 Chassis › 32 Suspension › 32.20 Steel springs, torsion bars, Niveaumat — Series 368 · Series 382 · Series 384 · Series 386 · Series 388 · Series 693 (models 023, 028, 081, 103, 108, 127, 128, 144, 148, 154, 171, 181, 182, 183, 184, 185, 186, 190, 191, 195, 196, 197, 298, 328, 348, 386, 388, 396) · Series 694 · Series 695 · Series 696 · Series 958 (models 092, 16*, 18*)

EinPAS 20 Chassis › 20.16 Suspension › 20.16.1 Basic information — Series 368 · Series 382 · Series 384 · Series 386 · Series 388 · Series 693 (models 023, 028, 081, 103, 108, 127, 128, 144, 148, 154, 171, 181, 182, 183, 184, 185, 186, 190, 191, 195, 196, 197, 298, 328, 348, 386, 388, 396) · Series 694 · Series 695 · Series 696 · Series 958 (models 092, 16*, 18*)

BE32.20-B-1000-02B

Rear axle steel suspension



Model	368, 382, 384, 386, 388, 693 (except 693.193/194), 694, 695, 696
Model	958.092/16/18

Metallic suspension in the rear axle

Number	Designation			Type 958.092/16/18	Model 368, 382, 384, 386, 388, 693 (except 693.127/193/194), 694, 695 (except 695.301/304), 696
BE32.20-B-1001-02B	Shackle spacing washers thickness		mm	-	4,00 à 4,20
BE32.20-B-1002-02B	Maximum clearance C required between the suspending U-bolt and the 3rd auxiliary axle beam	Vehicle empty without load	mm	20	-
		Vehicle without body	mm	10	-
BE32.20-B-1003-02B	Maximum wearing allowed between the joint pin and central rocker arm bushing		mm	2	-
BE32.20-B-1004-02B	Minimum thickness of the friction and side plates in the central rocker		mm	2	-
BE32.20-B-1005-02B	Measurement A of the tension struts adjustment between the joint bushing centers		mm	535	-
BE32.20-B-1006-02B	Measurement B (in both sides) for the bushing centering		mm	4	-

Metallic suspension in the rear axle

Number	Designation			Model 693.127, 695.301/304
BE32.20-B-1001-02B	Shackle spacing washers thickness		mm	-
BE32.20-B-1002-02B	Maximum clearance C required between the suspending U-bolt and the 3rd auxiliary axle beam	Vehicle empty without load	mm	20
		Vehicle without body	mm	10
BE32.20-B-1003-02B	Maximum wearing allowed between the joint pin and central rocker arm bushing		mm	2
BE32.20-B-1004-02B	Minimum thickness of the friction and side plates in the central rocker		mm	2
BE32.20-B-1005-02B	Measurement A of the tension struts adjustment between the joint bushing centers		mm	535
BE32.20-B-1006-02B	Measurement B (in both sides) for the bushing centering		mm	4