Test values for the valves camshaft |
Number | Designation | Engine 372.9, 374.9, 376.9, 377.9, 386.9 | ||
BE05.30-B-1001-04A | Rocker arm basic bore diameter for the bushing | mm | 22,000...22,052 | |
BE05.30-B-1002-04A | Outside diameter of rocker arm bushing | mm | 22,100...22,130 | |
BE05.30-B-1003-04A | Rocker arm bushing interference fit | mm | 0,048...0,130 | |
BE05.30-B-1004-04A | Inside diameter of bushing installed in rocker arm | final finishing | mm | 20,000...20,021 |
BE05.30-B-1005-04A | Rocker shafts diameter | mm | 19,967...19,980 | |
BE05.30-B-1006-04A | Radial clearance between rocker arm bushing and shaft. | mm | 0,020...0,054 | |
BE05.30-B-1007-04A | Length of rocker arm bushing. | mm | 22,7...23,0 | |
BE05.30-B-1008-04A | Tappet outside diameter (D) | Normal | mm | 27,98...27,99 |
Repair I | mm | 28,18...28,19 | ||
Repair II | mm | 28,48...28,49 | ||
Repair III | mm | 28,73...28,74 | ||
BE05.30-B-1009-04A | Tappet inside diameter (D) | mm | 22,0...23,0 | |
BE05.30-B-1010-04A | Tappet length (L) | mm | 59,8...60,6 | |
BE05.30-B-1011-04A | Clearance of tappets in engine block seat | mm | 0,010...0,053 | |
BE05.30-B-1012-04A | Maximum permissible perpendicularity deviation of bottom tappet face in relation to pushrod axis | mm | 0,03 | |
BE05.30-B-1013-04A | Overall pushrod length (a) | mm | 354,8...355,8 | |
BE05.30-B-1014-04A | Diameter (d) of pushrod body | mm | 7,91...8,0 | |
BE05.30-B-1015-04A | Maximum permissible pushrod warpage. | mm | 0,25 |