Test specifications for pistons
Número | Denominação | Engine 475.9, 476.9 | |||
BE03.10-B-1001-02C | Piston pin housing diameter | New | mm | 46.03 ...46.09 | |
Limit for reuse | mm | 46.020 | |||
BE03.10-B-1002-02C | Measurement (B) | mm | 108.9...109.2 | ||
BE03.10-B-1003-02C | Piston pin diameter | New | mm | 45.995...46.000 | |
Limit for reuse | mm | 45.990 | |||
BE03.10-B-1004-02C | Piston pin length | mm | 104.7...105.0 | ||
BE03.10-B-1005-02C | Radial play between the pin and the piston | New | mm | 0.003...0.014 | |
Wear limit | mm | 0,030 | |||
BE03.10-B-1006-02C | Distance between the piston upper face in the PMS above the block surface | mm | 0.07...0.43 | ||
BE03.10-B-1007-02C | Piston segment rings | ||||
Trapezoid ring ( I ) thickness | Nominal value | mm | 2.808...2.833 | ||
Compression ring ( II ) thickness | mm | 2.975...2.990 | |||
Oil baffle ( III ) thickness | mm | 3.975...3.990 | |||
Play in the compression ring ( II ) groove | mm | 0.060...0.095 | |||
Play in the oil baffle ( III ) groove | mm | 0.030...0.065 | |||
Play between the trapezoid ring ( I ) ends | New | mm | 0.35...0.50 | ||
Wear limit | mm | 1.0 | |||
Play between the compression ring ( II ) ends | New | mm | 0.35...0.50 | ||
Wear limit | mm | 1.0 | |||
Play between the oil baffle ( III ) ends | New | mm | 0.25...0.40 | ||
Wear limit | mm | 0.8 | |||