Test values for the cylinder liner |
Number | Designation | Engines 457.9 and 460.984 | ||
BE01.40-B-1001-03D | Cylinder linear inside diameter | Letter A | mm | 127,990...127,995 |
Letter B | mm | 127,995...128,005 | ||
Letter C | mm | 128,005...128,010 | ||
BE01.40-B-1002-03D | Maximum permissible wear on cylinder linear sliding surface | At top return point of the 1st piston ring | mm | 0,08 |
BE01.40-B-1003-03D | Out-of-round and taper on cylinder liner sliding surface | Max. permissible | mm | 0,012 |
BE01.40-B-1004-03D | Cylinder liner collar height | mm | 10,10...10,12 | |
BE01.40-B-1005-03D | Deformation on bottom face of cylinder linear collar (contact surface with the metal ring) | Max. permissible | mm | 0,02 |
BE01.40-B-1006-03D | Thickness of the metal ring (steel) | mm | 0,14...0,16 | |
BE01.40-B-1007-03D | Distance of cylinder linear top face (protrusion) above the engine block | Cylinder linear installed | mm | 0,23...0,33 |
BE01.40-B-1008-03D | Difference between the four measuring points | Max. permissible | mm | 0,02 |
BE01.40-B-1009-03D | Max. permissible out-of-round inside the cylinder linear, at O-rings area | Cylinder linear installed | mm | 0,02 |