Engine block test values |
Number | Designation | Engine 612.983 | ||
BE01.40-B-1001-02H | Cylinder bore | A | mm | 88,000...88,006 |
X | mm | 88,007...88,012 | ||
B | mm | 88,013...88,018 | ||
BE01.40-B-1002-02H | Out of round and conicity of cylinder | Maximum admissible | mm | 0,012 |
BE01.40-B-1003-02H | Maximum permissible wear on cylinder sliding surface | At the first piston ring reversing point | mm | 0,1 |
In the cylinder center | mm | 0,05 | ||
BE01.40-B-1004-02H | Main bearings in engine block (bearing shells housing) | Diameter, | mm | 62,500...62,519 |
Maximum permissible out of round and taper. | mm | 0,02 | ||
Width | mm | 19,979...20,000 |