Engine block test values |
Number | Designation | ENGINE 476.93 | ||
BE01.40-B-1001-02G | Sleeve heat housing depth | Normal | mm | 9,98...10,00 |
Normal I | mm | 10,32...10,34 | ||
BE01.40-B-1002-02G | Maximum permissible deformation in the sleeve lining housing, in the metal ring | contact surface | mm | 0,03 |
BE01.40-B-1003-02G | Roughness in the sleeve lining housing, in the metal ring contact surface | Rz | mm | 0,010 |
BE01.40-B-1004-02G | Block height (from the center of main bearings to the upper block face) | mm | 417,9...418,1 | |
BE01.40-B-1005-02G | Inner bearing diameter | mm | 111,000...111,022 | |
BE01.40-B-1006-02G | Maximum permissible misalignment between main bearings | mm | 0,03 | |
BE01.40-B-1007-02G | Main bearing cap bolts | Thread diameter | M | 18x2 |
new bolt length (L) | mm | 152,5...153,0 | ||
maximum permissible length (L) | mm | 156,0 |