Prescribed specification for service fill anti-corrosion agents/antifreeze | Change interval Whatever applies first, must be observed. | |||
MB Specifications for Operating Fluids, sheet | 325, 326 | |||
.0 | .6 | .7 | ||
Gasoline engines (incl. hybrid) | ||||
M 111, 112, 113 | 1.) | 2.) | – | 15 years/250,000 km |
M 133 | – | | – | 15 years/250,000 km |
M 137 | – | | – | 15 years/250,000 km |
M 15x | – | | – | 15 years/250,000 km |
M 176 | – | | – | 15 years/250,000 km |
M 177 | – | | – | 15 years/250,000 km |
M 200.71 (Citan) | – | – | 3.) | 6 years/160,000 km |
M 256 | – | | – | 15 years/250,000 km |
M 260 | – | | – | 15 years/250,000 km |
M 264 | – | | – | 15 years/250,000 km |
M 266 | 1.) | 2.) | – | 15 years/250,000 km |
M 27x | 1.) | 2.) | – | 15 years/250,000 km |
M 281 (smart model 453.0/3/4) | – | – | 3.) | 6 years/60,000 km |
M 282 | – | | – | 15 years/250,000 km |
M 285 | 1.) | 2.) | – | 15 years/250,000 km |
Diesel engines (incl. hybrid) | ||||
OM 607, 608 (Citan) | – | – | 3.) | 6 years/160,000 km |
OM 607, 608 (car) | 1.) | 2.) | – | 15 years/250,000 km |
OM 611, 612, 646, 647, 648 (car, van) | 1.) | 2.) | – | 15 years/250,000 km |
OM 622.8 | – | | – | 15 years/320,000 km |
OM 622.9 | 1.) | 2.) | – | 15 years/320,000 km |
OM 626 | – | | – | 15 years/250,000 km |
OM 628, 629 | 1.) | 2.) | – | 15 years/250,000 km |
OM 639 | 1.) | 2.) | – | 15 years/250,000 km |
OM 640 | 1.) | 2.) | – | 15 years/250,000 km |
OM 642 | 1.) | 2.) | – | 15 years/250,000 km |
OM 651 | 1.) | 2.) | – | 15 years/250,000 km |
OM 654 | – | | – | 15 years/250,000 km |
OM 656 | – | | – | 15 years/250,000 km |
OM 699.77 (X-Class) | – | – | 3.) | 6 years/160,000 km |
100% electric drives | ||||
Smart electric drive | – | – | 3.) | 6 years/60,000 km |
All other model series | – | 2.) | – | 15 years/250,000 km |
Fuel cells | ||||
All major assemblies | See F-CELL terminal point | |||
Notes:
Products according to Specifications for Operating Fluids 32x.6 may be mixed with products according to Specifications for Operating Fluids 32x.0 only in residual quantities or if the coolant is fully changed. For some vehicles, the approved anti-corrosion agent/antifreeze (MB sheet) are indicated in the respective operator's manual of the vehicle.
This table contains only the anti-corrosion agent/antifreeze for engines that have been produced in the last 15 years.
Information on unlisted or older engine types can be found in the operating instructions or maintenance procedures. Ensure that concentrated anti-corrosion agent/antifreeze (MB sheets 325.x) are mixed with suitable water as per the specifications from MB sheet 310.1 before being used in the cooling circuit. As a finished mixture, the anti-corrosion agent/antifreeze (MB sheets 326.x) may not be mixed with water for use.
Approval
- May not be used.
1 Restriction: For all vehicles with manufacturing date up to and including April 2014.
2 Restriction: For all vehicles with manufacturing date as from May 2014.
3 Restriction: Not compatible with products according to sheet 325.0/6, 326.0/6.
Referenced documents
- bb0040p031001a Coolant specifications