Subsequent conversion of Eberspächer Hydronic D5W Z heater booster to stationary heater

AZ83.70-S-0010A

Subsequent conversion of Eberspächer Hydronic D5W Z heater booster to stationary heater

16.12.98



Remove

1

Remove front seat

Driver side



AR91.10-S-1000A

2

Remove side access plate and upper cover from driver's seat frame.

3

Remove battery

4

Loosen wheelhouse cover in driver's footwell

5.1

Remove paneling below instrument panel in driver's footwell

Model 638.294

6.1

Remove plastic paneling on inside of driver's seat frame

Model 638.294

7

Remove door sill molding from driver's door

8

Remove radio and radio console

9

Loosen boot on shift lever from cover

10

Remove center instrument panel cover with AC pushbutton control module

 Two bolts in area of ventilation nozzles and two bolts in radio installation shaft at bottom.

11.1

Unclip paneling in passenger footwell and expose ATA control module

manual heater

12

Remove shield in area of heater booster



Install

13

Install timer on instrument panel

AZ83.70-S-0001-07B

14

Install stationary heater control module

AZ83.70-S-0010-01A

15

Connecting stationary heater control module

manual heater

AZ83.70-S-0010-02A

with automatic heater or air conditioning (Tempmatic)

AZ83.70-S-0010-02B

16

Fit remaining parts to vehicle

 Danger!

Risk of explosion from fuel vapors, risk of poisoning from inhaling combustion gases and risk of injury from burns during and after operation of heater unit

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

17

Switch on stationary heater according to operating instructions and check for proper function



Notes on retrofitting stationary heater with fuel combustion

AH83.70-N-0001-05A

Part no.

Designation

Quantity

B6 656 0168

Heater booster retrofit kit

1