Wiring harness repair kit
452 589 02 99 00
P83.70-4917-04
1 Clean and degrease the bonding surface for the Telestart antenna (1) on windshield (2).
2 Glue Telestart antenna (1) to windshield (2).
3 Route electrical line (3) under the headliner (4) to the left A-pillar (5).
4 Route electrical line (3) downwards into footwell and fasten using cable ties to the electrical wiring harness (6).
P83.70-4969-09
5 Insert included violet electrical line (24) with pin into free slot on plug (9) of included electrical wiring harness (14).
6 Remove insulation (arrow) on electrical wiring harness (14) far enough until the strapped down violet electrical line (25) is exposed.
7 Cut violet electrical line (25) to length and join to violet electrical line (24).
8 Remove sound deadening mat (7) in installation area of receiver (16) at A-pillar (5).
9 Clean and degrease area at A-pillar (5) and stick Velcro strips (10) onto A-pillar (5).
10 Clean and degrease area on receiver (16) and stick Velcro strips (11) onto receiver (16).
11 Connect plug (9) of included electrical wiring harness (14) and telestart antenna plug (12) on the receiver (16).
12 Press receiver (16) using Velcro strips (11) onto Velcro strips (10).
P83.70-4963-06
13 Join plug (13) of included electrical wiring harness (14), which is connected to the receiver (16), to the electrical wiring harness (15).
14 Make loops out of excess length electrical lines of electrical wiring harnesses (14, 15) and fasten using tie straps to suitable position.