Fuel pump
Number | Designation | Engine | Engine | Engine | Engine | ||
BA47.20-P-1001-01D | Tank bleeder at fuel pump | Nm | 5 | 5 | 5 | 5 | |
450 589 01 70 00
Twist drill set
Tank module tool
450 589 00 07 00
P83.70-4613-06
Shown on vehicle up to vehicle ident. end no.: 128917
1 Unplug connector (2).
2 Release upper section (3) out of guides (4).
3 Position body plate (5) with
outside diameter 14.5 mm on bottom side of upper part (3).
The body plate (5) must make contact with the bars (6, 7).
4 Transfer hole pattern (arrow).
5 Remove body plate (5) and drill hole with dia. 6 mm at marking (8).
6 Latch upper section (3) into guides (4) and contact plug (2).
P83.70-4616-01
7 Shape and cut tank bleeder (1) to length as shown in template included with package contents.
8 Install tank bleeder (1) with sealing ring in the upper part of the fuel pump with fuel level sensor (M3/3).
Observe installation instructions included in package contents when installing the
tank bleeder (1).
P83.70-4631-06
9 Insert fuel pump with fuel level sensor (M3/3) and sealing ring (9).
Replace sealing ring (9).
Note tank bleeder (1).
10 Screw on locking ring (10) with tank module tool.
11.1 Mount plug (11)
Only on vehicles up to vehicle ident end. no. 128917.
12.1 Attach fuel line (12) and vent hose of activated charcoal canister (13) to fuel pump with fuel level sensor (M3/3)
Only on vehicles up to vehicle ident end. no. 128917.