Retrofit multifunction antenna

AZ82.88-D-0001-02B

Retrofit multifunction antenna

 Danger

Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents

Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.

AS97.00-Z-0001-01A

Model

906

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

1

Determine installation position of multifunction antenna (3) at center to vehicle longitudinal axis on non-level surface on the roof.

 The bore hole must be drilled with precision in order to avoid water penetration.

2

Using a multi-stage countersink drill bit, drill a hole measuring Ø 20 mm (+0.5/-0.3) at the installation position, while at the same time vacuuming up the drill chips.

3

Deburr hole and Apply corrosion protection.

4

Detach adhesive foil and insert multifunction antenna (3) from above into hole and align.

5

Position the nut for the multifunction antenna (3) and tighten.

 While doing so, have multifunction antenna (3) fixed in place by a helper to prevent twisting of the multifunction antenna (3).