1 | Small parts kit |
2 | GPS GSM module |
3 | Configuration CD |
4 | Wiring harness |
W82.85-1704-06
W82.85-1705-09
5 | Dashboard cover | A9 | Truck Control Center (TCC) | A | Installation location (left) | ||
6 | Cover | A12 | Heating/ventilation control and operating unit | B | Installation location (center) | ||
7 | Cover | A44 | Instrument panel switch module 1 | C | Installation location (right) | ||
8 | Center air vent |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Select installation location (A, B, C). | Because there are several permitted installation locations (A, B, C) locating the GPS GSM module (2) is made more difficult. | |
The installation location at the right (C) is only possible on vehicles without code D7V (Table, on front passenger side). | |||
2 | Remove bottom trim for instrument panel on front passenger side. | ||
| |||
3 | Remove air duct in footwell on front passenger side. | ||
4 | Remove trim (6) from instrument panel. | Only for installation location (C). | |
| |||
5 | Remove instrument panel switch module 1 (A44). | Only for installation location (A). | |
| |||
6 | Unclip instrument panel cover (5) upwards. | Only for installation location (A or B). | |
Mounting wedge | |||
7 | Remove Truck Control Center(TCC) (A9). | Only for installation location (A or B). | |
| |||
8 | Remove ventilation heating control and operating unit (A12). | Only for installation location (A or B). | |
| Vehicles without code J6B (Multimedia cockpit) or without code J6C (Multimedia cockpit, interactive) | ||
9 | Remove center air vent (8). | Only for installation location (A or B). | |
| Vehicles without code J6B (Multimedia cockpit) or without code J6C (Multimedia cockpit, interactive) | ||
| Install | ||
10 | Install GPS/GSM module (2). | Retrofit GPS GSM module at right | |
Retrofit center GPS GSM module | |||
Retrofit left GPS-GSM module | |||
Depending on selected installation location (A, B or C). | |||
11 | Connect wiring harness (4) to sensor and actuator module, cab (SCA) control unit (A7). | ||
12 | Install center air vent (8). | Only for installation location (A or B). | |
| Vehicles without code J6B (Multimedia cockpit) or without code J6C (Multimedia cockpit, interactive) | ||
13 | Install ventilation heating control and operating unit (A12). | Only for installation location (A or B). | |
| Vehicles without code J6B (Multimedia cockpit) or without code J6C (Multimedia cockpit, interactive) | ||
14 | Install Truck Control Center(TCC) (A9). | Only for installation location (A or B). | |
| |||
15 | Install instrument panel cover (5). | Only for installation location (A or B). | |
16 | Install instrument panel switch module 1 (A44). | Only for installation location (A). | |
| |||
17 | Install trim (6) of instrument panel. | Only for installation location (C). | |
| |||
18 | Remove air duct in footwell in front passenger side. | ||
19 | Install bottom trim for instrument panel on front passenger side. | ||
| |||
20 | Register GPS/GSM module (2) in the COBRA network by phone. | See configuration CD (3). |
110 589 03 59 00
Mounting wedge
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar5425w3280h Remove/install switch module
- ar6810w1502h Remove/install bottom paneling for dashboard on passenger side
- ar6810w3435h Remove/install upper paneling for dashboard on passenger side
- ar8260w7800h Remove/install Truck Control Center (TCC)
- ar8310w4503ha Remove and install center air vent
- ar8320w2000h Removing and installing heater pushbutton control module
- az8285w200401a Retrofit left GPS-GSM module
- az8285w200402a Retrofit center GPS GSM module
- az8285w200403a Retrofit right GPS-GSM module
- az8285w200404a Electrically connect GPS GSM module