| Install | ||
1 | Activate Event Call function | To do so, contact FleetBoard Workshop Support at 0049 7271981818. | |
2.1 | Connect switch to contact cavity 7 and contact cavity 13 of electrical connector (A30 X1) | Vehicles with code J3D (FleetBoard vehicle computer with FB driver card) | |
| Wiring diagram for FleetBoard control unit | Model 963 up to 31.05.13, 964 up to 31.03.13 | |
| Wiring diagram for FleetBoard control unit | Model 963 as of 01.06.13 up to 01.06.19 with code V2A (Actros model generation 1) or with code V2E (Antos model generation 1) model 964 as of 01.04.13 up to 01.06.19 with code V2I (Arocs model generation 1) or with code V3K (Actros BM964 model generation 1) | |
Depending on the customer request, use a switch for this, e. g. cargo liftgate limit switch. | |||
2.2 | Connect switch to contact cavity 22 and contact cavity 16 of electrical connector (A30a X1) | Vehicles with code J3J (New FleetBoard vehicle computer with DTCO driver card) | |
| Wiring diagram for FleetBoard control unit | Model 963 as of 01.06.13 up to 01.06.19 with code V2A (Actros model generation 1) or with code V2E (Antos model generation 1) model 964 as of 01.04.13 up to 01.06.19 with code V2I (Arocs model generation 1) or with code V3K (Actros BM964 model generation 1) | |
Depending on the customer request, use a switch for this, e. g. cargo liftgate limit switch. | |||
Update Vehicle Documentation (VeDoc) | |||
3 | Attach note "Retrofit of Event Call function for FleetBoard as per AZ82.85-W-0010A performed" under field organization texts to DG 82 |
Referenced documents
- pe8285w2103sfa Wiring diagram for FleetBoard control unit
- pe8285w2103sta Wiring diagram for FleetBoard control unit