az8264d0001d

Retrofit CD changer

Type az · topic 82.64 · version 0101 · 2019-04-18

Applies to: Model 906 with code EF9 (Radio Sound 20) With tachograph Model 906 with code EN4 (COMAND with TMC interface) With tachograph Model 906 with code EN8 (Radio sound 50 APS) With tachograph

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.64 CD changer — Series 906

EinPAS 31 Communication/information/entertainment › 31.67 Media playback/data medium › 31.67.3 Retrofitting/modification — Series 906

AZ82.64-D-0001D

Retrofit CD changer

19.03.2019

Model

906

with code EF9 (Radio Sound 20)

With tachograph

Model

906

with code EN4 (COMAND with TMC interface)

With tachograph

Model

906

with code EN8 (Radio sound 50 APS)

With tachograph

Retrofit CD changer

Shown on model 906 with code EN8 Sound 50 APS radio

1

Cover

2

Sound 50 APS radio

D68.10-1148-12

Retrofit CD changer

A2/6

CD changer

3

Wiring harness

D68.10-1149-01

Remove

1

Remove cover (1)

To do so, unclip cover (1) carefully, starting at top, using long wedge. Disconnect electrical connector from cover (1) and remove cover (1).

Long wedge

*115589035900

2

Remove radio or COMAND operating, display and controller unit

With code EF9 Sound 20 radio With code EN8 Sound 50 APS radio With code EN4 COMAND with TMC interface

3

Remove center footwell cover

AR68.30-D-1320A

4

Remove left front floor covering

AR68.20-D-2050A

Install

5

Route wiring harness (3) of CD changer (A2/6) retroactively from front passenger seat console to radio

Topical note

Notes on avoiding damage to optical fibers during repair work

AH82.60-P-0001-05AK


Route wiring harness (3) at air distribution pipe along in footwell. Ensure it is routed without kinks and free of chafing:
This prevents possible noise development and damage.

Fiber optic cable is included with the wiring harness.

6

Connect wiring harness (3) at CD changer (A2/6)

7

Prepare CD changer (A2/6) for retrofit

Remove information sheet on CD changer (A2/6) and attach dust seals to CD changer (A2/6). Observe instruction on information sheet.

8

Retrofit CD changer (A2/6) into front passenger seat console

9

Connect wiring harness (3) of CD changer (A2/6) at radio or COMAND operating, display and controller unit

10

Install in the reverse order

Operation steps 4 to 1

11

Activate CD changer (A2/6) retroactively with Star Diagnosis

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-D-2000-04SD

Configure MOST ring.

12

Carry out function check of CD changer (A2/6)

See operating instructions

13

Enter special equipment in FDOK

The new code designation is code EP5 CD changer.

Retrofit CD changer

115 589 03 59 00

Long wedge

Parts ordering note

Part no.

Designation

Quantity

B6 656 0799

MP3CD changer

1

B6 656 0673

Installation kit for MP3 CDC

1

Referenced documents