Retrofit antitheft alarm system (ATA)

AZ80.50-P-0002FF

Retrofit antitheft alarm system (ATA)

17.1.06



Remove

1

Remove right front lamp unit



Remove/install lamp unit

AR82.10-P-4730FF

2

Remove engine hood catch bottom section



Remove/install engine hood catch

AR88.40-P-3200FF

3

Detach front right fender liner

4

Remove paneling in left footwell



Remove/install paneling in footwell

AR68.30-P-4010FF

5

Remove instrument panel upper section



Remove/install instrument panel upper section

AR68.10-P-1020FF

6.1

Remove covers below left instrument panel

On vehicles with code (LHD) Left-hand drive vehicle



Remove/install cover below instrument panel (left)

AR68.10-P-1500FF

7

Remove left door sill molding



Remove/install door sill molding

AR68.30-P-4100FF

8

Remove upper paneling from left B-pillar.



Remove/install paneling on B-pillar

AR68.30-P-4700FF



Install

9

Clip ATA hood switch (S62) into engine hood catch bottom section

 If applicable, remove guide (7) from ATA hood switch (S62).

10

Position ultrasonic sensor module (N133) in area of rear entrance.

 Danger!

Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tube.

Work in well ventilated rooms only. Wear safety glasses with side protection and protective gloves.

AS00.19-Z-0001-01A

11

Route engine compartment wiring harness (1) and interior wiring harness (2) and connect

AZ80.50-P-0001-07FF



*450589016300



*452589029900



Notes on stripping wires

Crimper and wire stripper

AH00.19-P-1000-12SM

12

Install ATA control unit (N26)

AZ80.50-P-0002-01FF

13

Install left front ATA ultrasonic sensor (B39/5) and right rear ATA ultrasonic sensor (B39/7) and connect.

AZ80.50-P-0001-12FF

Loctite 401

*BR00.45-Z-1065-02A

14

Install alarm signal horn with additional battery (H3/1)

AZ80.50-P-0001-15FF

15

Install in the reverse order

 Operation steps 8 to 1.

16

Check anti-theft alarm (ATA) for proper function

17

Program anti-theft alarm system (ATA)

AZ80.50-P-0002-17FF

18.1

Enter special equipment in the vehicle data card and in the vehicle's online data card

If a DMS Autoline 8.0 dealer system is not available in the workshop.

 Enter code (V40) Alarm system.

Number

Designation

Order number

BR00.45-Z-1065-02A

Loctite 401

Henkel Loctite Deutschland GmbH
Arabellastrasse 17
81925 München
Germany
Tel. +49 899268-0
Fax + 49 899101978
www.Loctite.de