L68.20-0008-09
1 Left trim paneling
2 Right cover
a Dimension of side paneling to center of left cargo space floor mount
d Dimension for width of cargo space floor mount cutout
e Dimension for length of cargo space floor mount cutout
b Dimension of left cargo space floor mount to right cargo space floor mount
c Dimension of side paneling to center of right cargo space mount
| Remove | ||
1 | Remove luggage compartment net | ||
| Install | ||
2 | Cut floor covering according to dimension (a, b, c ) | The cut for covers (1, 2) is 120 mm below the front tie eyes. Dimension a and dimension c = 125 mm, Dimension b = 900 mm. | |
3 | Cut out floor covering for left cover, right cover (1, 2) according to dimension (d, e). | Dimension (d) = 55 mm, dimension (e) = 535mm. | |
4 | Install left cover, right cover (1, 2) | ||
5 | Install cargo space floor | See Operating Instructions | |
6 | Fit remaining parts to vehicle |
Parts ordering notes
Part no. | Designation | Quantity |
Design group 68 (see EPC) | Rear seat cover, 3rd row | 2 |