az4910p0002d

Retrofitting AMG end pipe

Type az · topic 49.10 · version 0101 · 2003-02-04

Applies to: ENGINE 112.922 in MODEL 220.063 ENGINE 112.944 in MODEL 220.065 /165 ENGINE 113.941 in MODEL 220.070 /170 ENGINE 113.960 in MODEL 220.075 /175 ENGINE 613.960 in MODEL 220.026 /126 ENGINE 628.960 in MODELS 220.028 /128 ENGINE 112.972 in MODEL 220.067 /167 ENGINE 112.975 in MODEL 220.087 /187 ENGINE 113.948 in /183 ENGINE 113.966 in MODEL 220.084 /184 ENGINE 648.960 in MODEL 220.025 /125

Where it sits

Function group 1 Engine › 49 Exhaust system, exhaust gas cleaning › 49.10 Exhaust pipes, catalytic converter, mufflers — Series 220 (models 025, 026, 028, 063, 065, 067, 070, 075, 083, 084, 087, 125, 126, 128, 165, 167, 170, 175, 183, 184, 187) · Series 613 (models 960) · Series 628 (models 960) · Series 648 (models 960)

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.3 Retrofitting/modification — Series 220 (models 025, 026, 028, 063, 065, 067, 070, 075, 083, 084, 087, 125, 126, 128, 165, 167, 170, 175, 183, 184, 187) · Series 613 (models 960) · Series 628 (models 960) · Series 648 (models 960)

Also applies to engines/gearboxes: 112 922, 112 944, 112 972, 112 975, 113 941, 113 948, 113 960, 113 966

AZ49.10-P-0002D

Retrofitting AMG end pipe

1.2.01

ENGINE 112.922 in MODEL 220.063

ENGINE 112.944 in MODEL 220.065 /165

ENGINE 113.941 in MODEL 220.070 /170

ENGINE 113.960 in MODEL 220.075 /175

ENGINE 613.960 in MODEL 220.026 /126

ENGINE 628.960 in MODELS 220.028 /128

ENGINE 112.972 in MODEL 220.067 /167

ENGINE 112.975 in MODEL 220.087 /187

ENGINE 113.948 in /183

ENGINE 113.966 in MODEL 220.084 /184

ENGINE 648.960 in MODEL 220.025 /125

Retrofitting AMG end pipe
Retrofitting AMG end pipe

P49.10-2148-01

a = 90 °

b = At least 10 mm

P49.10-2149-01

Remove

1

Remove the series exhaust suspension rings on both rear mufflers

2

Shorten standard tailpipes (see arrow)

Carefully deburr the cut edges.

3

Cut out the tail pipe cut-outs on the rear apron using the template provided

Sand down cut edges and paint in the vehicle color.

Install

4

Install the reinforced exhaust suspension rings supplied

5

Push AMG tailpipes onto shortened standard tailpipes and align

Line up the rear muffler as required.

6

Tighten up the clamp slightly and screw out the securing screw

Mark the position of the securing screw on the series tailpipe.

7

Remove AMG-tail pipes

Create a 9 mm diameter bore hole in the series tail pipes at the marked location.

8

Install and align AMG tailpipes

Secure clamp and tighten lock screw securely.

The model approval certificate supplied for the AMG tailpipes must be kept in the vehicle. Approval by the Technical Inspection Association is not necessary in Germany!

Parts ordering notes

Part no.

Designation

Quantity

B6 603 08 12

AMG tailpipe kit, models 220.063/065/067/087/165/167/187

1

A220 003 42 99

Cutting template for MB standard rear apron

1

A220 003 43 99

Cutting template for AMG rear apron

1

A220 492 02 44

LU suspension ring

2

B6 603 08 13

AMG tailpipe kit, models 220.070/075/083/084/170/175/183/184

1

A220 003 42 99

Cutting template for MB standard rear apron

1

A220 003 43 99

Cutting template for AMG rear apron

1

A220 492 02 44

LU suspension ring

2

B6 603 08 14

AMG tailpipe kit, models 220.025/026/028/125/126/128

1

A220 003 42 99

Cutting template for MB standard rear apron

1

A220 003 43 99

Cutting template for AMG rear apron

1

A220 492 02 44

LU suspension ring

2