ar9175w7700a

Removing and installing bottom bunk mattress and stowage compartments

Type ar · topic 91.75 · version 0101 · 1997-02-19

Applies to: BODY 942.899 with CODE (F04) Cab L (long)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.75 Berths — Series 942 (models 899)

EinPAS 37 Interior equipment › 37.40 Bed/bunk/sleeper compartment › 37.40.30 Bunk/bed — Series 942 (models 899)

AR91.75-W-7700A

Removing and installing bottom bunk mattress and stowage compartments

28.3.96

BODY 942.899 with CODE (F04) Cab L (long)

Removing and installing bottom bunk mattress and stowage compartments

W91.75-0001-06

1 Retaining ring

2 Gas pressure strut
3 Ball head
4 Pivot bracket
5 Bunk element
6 Center stowage compartment
7 Side stowage compartments
8 Hex. head bolt
9 Screwdriver

Removal, installation

1

Fold up bunk element

2

Pull gas pressure strut (2) off of ball head (3)

Lift retaining ring (1) only slightly with narrow screwdriver (9).

Installation: Press gas pressure strut onto ball head with force until it catches.

3

Remove pivot bracket (4) for gas pressure strut from rear wall

Release load on catch strap to loosen screw. For this propose fold down bunk element slightly.

4

Loosen screws (8) on rear wall and remove bunk element (5) together with gas pressure strut and catch strap

Installation: Before installing bunk elements partially screw in screws.

5

Remove center stowage compartment (6) then remove stowage compartments on left and right (7)

If voltage converters are installed, disconnect connectors.

6

Reinstall in opposite order