ar9175s0010ee

Removing and installing bed extension

Type ar · topic 91.75 · version 0101 · 2015-11-24

Applies to: Model 447.7 with code ZH6 (Marco Polo ACTIVITY) Model 447.8 with code V9B (FUN 2 package: sleep) except code ZK7 (Equipment line MARCO POLO)

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.75 Berths — Series 447 (models 7**, 8**)

EinPAS 37 Interior equipment › 37.40 Bed/bunk/sleeper compartment › 37.40.30 Bunk/bed — Series 447 (models 7**, 8**)

AR91.75-S-0010EE

Removing and installing bed extension

04.11.2015

Model

447.7

with code ZH6 (Marco Polo ACTIVITY)

Model

447.8

with code V9B (FUN 2 package: sleep)

except code ZK7 (Equipment line MARCO POLO)

Removing and installing bed extension

S91.75-4519-09

1

Bed extension

4

Slider

2

Release

5

Guide rail

3

Release handle

6

Side paneling

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Actuate release (2) and fold up bed extension (1)

Installation: Deviating gap dimensions (arrows)  5 mm between the folded up bed extension (1) and left and right side paneling (6) are within the tolerance.
These gap dimensions (arrows) cannot be adjusted.

2

Operate both release handles (3), as shown

3

Lift bed extension (1) upwards and out of sliders (4) on guide rails (5)


Do not set down bed extension (1) on guide rails (5).
Otherwise they may be damaged.

Helper required.

4

Replace left or right release handle (3)

When the left or right release handle (3) is damaged.

AR91.75-S-9873E

5

Install in the reverse order

Referenced documents