ar9175d7760ec

Remove/install guide roller for bed plate

Type ar · topic 91.75 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.75 Berths — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.40 Bed/bunk/sleeper compartment › 37.40.30 Bunk/bed — Series 903 (models 6**)

AR91.75-D-7760EC

Remove/install guide roller for bed plate

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Remove/install guide roller for bed plate

D91.75-0030-01

1 Center bed plate

2 Bed padding

3 Rear bed plate

Remove/install guide roller for bed plate

D91.75-0031-05

4 Bolts

5 Guide rollers

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Unlock and open the center bed plate (1)

2

Remove bed padding (2)

3

Pull the rear bed plate (3) toward the rear

4

Remove screws (4).

5

Remove the guide rollers (5)

6

Install in the reverse order

Referenced documents