ar9175d7755ecc

Remove/install bed plate

Type ar · topic 91.75 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper Front bed plate

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.75 Berths — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.40 Bed/bunk/sleeper compartment › 37.40.30 Bunk/bed — Series 903 (models 6**)

AR91.75-D-7755ECC

Remove/install bed plate

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper
Front bed plate

Remove/install bed plate

D91.75-0007-06

1 Bolts

2 Bolts

3 Bracket

5 Front bed plate

Remove/install bed plate

D91.75-0011-01

4 Right vent window

5 Front bed plate

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Remove bed plate

Rear bed plate

AR91.75-D-7755ECA

2

Remove bed plate

Center bed plate

AR91.75-D-7755ECB

3

Removing the guide rail

Left guide rail

AR91.75-D-7765ECA

4

Removing the guide rail

Right guide rail

AR91.75-D-7765ECB

5

Remove right paneling on right vent window (4)

Side vent window for high roof

AR68.30-D-1550EC

6

Remove bolts (1)

7

Remove screws (2) from bracket (3)

8

Remove bracket (3)

9

Open the right vent window (4) and secure it in place

10

Remove the front bed plate (5)

The front bed plate (5) must be removed from the vehicle as shown.

11

Install in the reverse order

Referenced documents