ar9175d7755a

Remove/install bed plate

Type ar · topic 91.75 · version 0100 · 2004-11-02

Applies to: MODEL 903.662 with CODE (ZU8) National version for USA with CODE (Z29) "James Cook" touring camper, NAFTA rear bed plate

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.75 Berths — Series 903 (models 662)

EinPAS 37 Interior equipment › 37.40 Bed/bunk/sleeper compartment › 37.40.30 Bunk/bed — Series 903 (models 662)

AR91.75-D-7755A

Remove/install bed plate

7.7.04

MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
rear bed plate

Remove/install bed plate

D91.75-0025-01

1 Rear bed plate

Remove/Install

Danger!

Risk of injury due to pinching, crushing or cutting off of limbs or other parts of the body by doors, covers, lids, flaps and other movable components

No limbs or other parts of the body should be within the operating range of the mechanism when moving components (doors, covers, lids, flaps, etc.). Wear protective gloves and work shoes.

AS00.00-Z-0025-01A

1

Remove bed plate guide rollers

AR91.75-D-7760A

2

Open the vent window on the right side of the high roof

3

Remove the rear bed plate (1)

Position the rear bed plate (1) at an angle as shown and remove it (let one corner of the rear bed plate (1) extend through the opening of the right vent window).

4

Install in the reverse order

Referenced documents