ar9175d7730ec

Remove/install protective net

Type ar · topic 91.75 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.75 Berths — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.40 Bed/bunk/sleeper compartment › 37.40.60 Trim/stowage box/tray — Series 903 (models 6**)

AR91.75-D-7730EC

Remove/install protective net

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Remove/install protective net
Remove/install protective net

D91.75-0030-01

1 Center bed plate

2 Rear bed plate

3 Bolt

4 Loop hanger

5 Bolts

6 Protective net

D91.75-0028-01

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Unlock and open the center bed plate (1)

See Operator's Manual

2

Slide the rear bed plate (2) toward the rear

See Operator's Manual

3

Remove bolt (3)

4

Remove the loop hanger (4)

5

Loosen screws (5).

6

Remove the protective net (6)

7

Install in the reverse order

Referenced documents