ar9175d0010ec

Removing and installing bed extension

Type ar · topic 91.75 · version 0100 · 2005-08-10

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.75 Berths — Series 903 (models 6**)

EinPAS 37 Interior equipment › 37.40 Bed/bunk/sleeper compartment › 37.40.30 Bunk/bed — Series 903 (models 6**)

AR91.75-D-0010EC

Removing and installing bed extension

18.3.05

MODEL 903.6 with CODE (ZL9) "James Cook" touring camper

Removing and installing bed extension

D91.75-0001-06

1 Bed extension

2 Bolts

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Move bench seat forwards

See Operator's Manual

2

Fold up bed extension (1)

3

Loosen bolt (2)

4

Remove bed extension (1)

5

Install in the reverse order

Referenced documents