AR91.60-P-0611-02RT | Deployment of removed airbag units | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
| Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units | ||
| Notes on disposing of airbag and emergency tensioning retractor units |
P91.60-0219-01
2 Pressure switch, battery control
3 Pressure switch, deployment
4 Rotary switch
5 Indicator lamp, deployment
7 Plug connector, adapter line
8 2-pin plug connector
Use of deployment device
1 Insert 2-pin connector (8) into unit to be scrapped
2 Dial rotary switch (4) to position "1".
3 Press battery control pressure switch (2) and deployment pressure switch (3) simultaneously.
4 On airbag with two ignition squibs it is necessary to ignite both.To do this, repeat steps 1 through 3 after plugging the ignition cable into the second squib.
Observe safety distance of 10 m to prevent danger of injury.
After a successful deployment, the deployment indicator lamp (5) flashes.
Referenced documents
- ah9160p061102p Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units
- as9100z000101a Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.
- os9100p000101a Notes on disposing of airbag and emergency tensioning retractor units