Remove/install driver knee airbag

AR91.60-P-0200RG

Remove/install driver knee airbag

25.11.2019

Model

190

1

Instrument panel

3

Driver kneebag

2

Bolts

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Switch on ignition and store transmitter key outside of transmission range (min. 2 m)

2

Disconnect battery ground line

AR54.10-P-0003RG

3

Dashboard (1) removal

AR68.10-P-1000RG

4

Release and disconnect electrical connectors from driver kneebag (3)

 Removal lever

*203589043300

5

Remove bolts (2)

 Bolt/nut, kneebag to instrument panel at bottom

*BA91.60-P-1004-01N

6

Remove driver kneebag (3)

7

Install in the reverse order



Check

8

Check vehicle fault memory with diagnostic system and erase

When replacing driver kneebag (3).



AD00.00-P-2000-04B

 Airbag

Number

Designation

Model 190

BA91.60-P-1004-01N

Bolt/nut, kneebag to instrument panel at bottom

Nm

2,5