Remove/install driver knee airbag

AR91.60-P-0200LF

Remove/install driver knee airbag

25.11.2019

Model

217

Model

222

1

Driver kneebag

2

Bolts

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Adjust driver seat backwards and steering column upwards

2

Switch on ignition and store transmitter key outside of transmission range (min. 2 m)

3

Disconnect battery ground line

AR54.10-P-0003LF

4

Remove screw/bolts (2)

 Bolt, knee airbag to footwell cover

*BA91.60-P-1003-01I

5

Remove driver kneebag (1), until the electrical connector (arrow) of the driver kneebag squib is accessible

6

Release and disconnect electrical connector (arrow) from driver kneebag squib

 Removal lever

*203589043300

7

Remove driver kneebag (1)

8

Install in the reverse order



Check

9

Check and erase vehicle fault memory using the diagnostic system

When replacing the driver kneebag (1).



AD00.00-P-2000-04B

 Airbag

Number

Designation

Model 217

Model 222

BA91.60-P-1003-01I

Bolt, knee airbag to footwell cover

Nm

5

5